Laying of a tiling on top of an old one
Civil work
Edification
SoluciónLaying of a tiling on top of an old one
Descripción sistema
The constant evolution in the aesthetics and format of tiles, together with the need to carry out tiling renovations quickly and easily, has led to the development of adhesives that make it easier to lay a new tile on top of an old tile without having to remove the old one first.
Traditionally, in order to replace one tiling with another, the existing tiles had to be removed first and the substrate had to be levelled.
The characteristics of the new tiles, which are very smooth and not very absorbent, make the use of special bonding materials essential.
In order to achieve a correct installation that guarantees optimum adhesion, it is necessary to use adhesives that are highly flexible and easy to apply(VAT® FLEXIBLE,VAT® FLEX RAPID,PAM® ECOGEL FLEX, PAM® ECOGEL SUPERFLEX).
Linked solutions
- INSTALLATION OF LARGE-FORMAT CERAMIC TILES ON FLOORS
- LAYING OF CERAMIC TILES ON OUTDOOR TERRACE
- LAYING CERAMIC TILES ON LARGE-FORMAT BRICKS
- CERAMIC TILE INSTALLATION ON FRESH MORTAR
- LAYING TILES ON PREFABRICATED GYPSUM BLOCKS
- LAYING OF CERAMIC TILES ON FAÇADES
- CERAMIC TILE INSTALLATION ON IRREGULARLY SHAPED SUBSTRATES
- LAYING CERAMIC TILES IN SWIMMING POOLS
- CERAMIC TILE INSTALLATION ON PLASTERBOARD SUBSTRATES
- LAYING TILES ON FLOORS WITH UNDERFLOOR HEATING
- LAYING OF PORCELAIN STONEWARE
- INSTALLATION OF NATURAL OR ARTIFICIAL STONE ON FAÇADES
- LAYING CERAMIC FLOORING ON TOP OF AN OLD ONE
Related products
Solution: tiling over old tiles
PREPARATION OF THE SUBSTRATE
Check the stability of the existing tiling, removing all loose tiles and levelling the substrate in these areas with mortar.
Open the pores of the tiles on the substrate by washing with 50% hydrochloric acid (salfuman) with water and then washing with plenty of water.
APPLICATION
Once the substrate is dry, spreadVAT® FLEXIBLE,PAM® ECOGEL FLEXorPAM® ECOGEL SUPERFLEXwith a notched trowel.
Place the pieces, exerting good pressure on them, until the grooves are completely flattened.
Leave a minimum joint of 2 mm and fill them later, at least 3 days after installation, with theBORADA®range of joint mortars byMolins.
Recommendations
- ApplyPROPAM® GRIP + adhesion primer to ensure anchorage.
- UseVAT® FLEXIBLEorPAM® ECOGEL FLEXfor laying ceramic tiles with or without absorption on old tiling.
- For fast commissioning, useVAT® FLEX RAPID.
- Application using the double-gluing technique
- Preferably use BORADA® EPOLUXEfor easy-cleaning, bacteriostatic, fungicidal and acid-proof decorative grouting in joints up to 20 mm.