Laying ceramic tiles on outdoor terrace
Civil work
Edification
SoluciónLaying ceramic tiles on outdoor terrace
Descripción sistema
Ceramic tiles laid on terraces, roof terraces and other outdoor paving with similar characteristics are exposed to numerous environmental aggressions (thermal changes, rain, frost, etc.), which cause significant expansion and deformation, so that their installation must be carried out following a very demanding methodology.
Temperature changes cause expansion movements of the workpieces, which the bonding material must also withstand.
A highly flexible adhesive mortar VAT® FLEXIBLE / PAM® ECOGEL FLEX / PAM® ECOGEL SUPERFLEX is required for correct installation, thus guaranteeing optimum adhesion.
In addition, the use of a flexible cementitious waterproofing product that guarantees watertightness and is compatible with the subsequent adhesive, such as PROPAM® IMPE FLEX, should be considered on terraces.
Linked solutions
- INSTALLATION OF LARGE-FORMAT CERAMIC TILES ON FLOORS
- LAYING CERAMIC TILES ON LARGE-FORMAT BRICKS
- CERAMIC TILE INSTALLATION ON FRESH MORTAR
- LAYING TILES ON PREFABRICATED GYPSUM BLOCKS
- LAYING OF CERAMIC TILES ON FAÇADES
- CERAMIC TILE INSTALLATION ON IRREGULARLY SHAPED SUBSTRATES
- LAYING CERAMIC TILES IN SWIMMING POOLS
- CERAMIC TILE INSTALLATION ON PLASTERBOARD SUBSTRATES
- LAYING TILES ON FLOORS WITH UNDERFLOOR HEATING
- LAYING OF PORCELAIN STONEWARE
- INSTALLATION OF NATURAL OR ARTIFICIAL STONE ON FAÇADES
- LAYING A TILING ON TOP OF AN OLD ONE
- LAYING CERAMIC FLOORING ON TOP OF AN OLD ONE
Related products
Solution: Laying ceramic tiles on an outdoor terrace
PREPARATION OF THE SUBSTRATE
Check that the substrate is resistant, perfectly set, free of dust, paint, oil…
Check the flatness of the substrate with a ruler 2 metres long; differences should be less than 5 mm and repair defects by filling the gaps with mortar.
APPLICATION
Knead with a slow electric mixer (500 rpm).
Spread VAT® FLEXIBLE / PAM® ECOGEL FLEX on the substrate with a notched trowel.
Carry out a good planning and execution of the movement joints; intermediate joints every 10 to 25 m², and perimeter joints with a minimum width of 5 mm in the joints between the ceramic flooring and the vertical walls. The use of PROPAM® IMPE FLEX waterproofing under ceramic tiles is recommended.
Leave a minimum joint width of 5 mm; grout after 24 hours with the BORADA® range of joint mortars by Molins.
Recommendations
- Do not apply in rainy conditions, or at temperatures <5°C or >30°C.
- Use waterproofing under flexible cementitious ceramic.
- Double glue if the tile format is larger than 900 cm².
- For quick commissioning useVAT® FLEX RAPID.
- For laying large format tiles (>60 on one side) use PAM® ECOGEL SUPERFLEX.
Would you like to receive more information?
Complete this form and we will get back to you as soon as possible 🙂