Ceramic tile installation on irregularly shaped substrates
![](https://molins-dev.mo2o.com/construction-solutions/wp-content/uploads/sites/6/2021/12/miniatura0038-miniatura-colocacion-ceramica-soportes-planimetria-irregular-1.jpeg)
Civil work
Edification
SoluciónCeramic tile installation on irregularly shaped substrates
Descripción sistema
On many occasions, when the substrate has an uneven surface, standard EN 138002 indicates that it should be regularised until, using a two-metre ruler, the differences in flatness are less than 5 mm. Occasionally, other materials or adhesives may be used which, owing to their characteristics, allow thick layers to be applied, capable of providing good adhesion when the required tile-to-tile thicknesses are of the order of 10-15 mm.
![](https://molins-dev.mo2o.com/wp-content/uploads/sites/6/pc_block_prop/4688/value/propamsa-0009-dsc4425-ok.jpg)
When there are deficiencies of planimetry in the substrate, it is not advisable to use the “tapping” or “sticking” tile installation technique, because this limits the adhesion of the adhesive mortar, which can lead to detachments.
![](https://molins-dev.mo2o.com/wp-content/uploads/sites/6/pc_block_prop/4697/value/propamsa-0008-falso-doble-encolado-ok.jpg)
The “false double gluing”, which consists of spreading the adhesive mortar on the substrate and applying “dabs” or “dabs” on the piece, produces the same effect as “tapping” tile installation, as well as excessive consumption of adhesive mortar.
![](https://molins-dev.mo2o.com/wp-content/uploads/sites/6/pc_block_prop/4706/value/propamsa-0013-dsc4293-ok.jpg)
Check the flatness of the substrate with a ruler 2 metres long; if the differences are greater than 5 mm, a thick-bed adhesive mortar can be used as a bonding material at specific points (low areas).
![](https://molins-dev.mo2o.com/wp-content/uploads/sites/6/pc_block_prop/4772/value/propamsa-0003-vat-porcelmax4735-ok.jpg)
VAT® FLEX RAPID/ PAM® ECOGEL FLEX/ PAM® ECOGEL SUPERFLEX must be used to even out the substrate surface up to a thickness of 15 mm and to ensure proper adhesion to non-absorbing parts.
Linked solutions
- INSTALLATION OF LARGE-FORMAT CERAMIC TILES ON FLOORS
- LAYING OF CERAMIC TILES ON OUTDOOR TERRACE
- LAYING CERAMIC TILES ON LARGE-FORMAT BRICKS
- CERAMIC TILE INSTALLATION ON FRESH MORTAR
- LAYING TILES ON PREFABRICATED GYPSUM BLOCKS
- LAYING OF CERAMIC TILES ON THE FAÇADE
- LAYING CERAMIC TILES IN SWIMMING POOLS
- CERAMIC TILE INSTALLATION ON PLASTERBOARD SUBSTRATES
- LAYING TILES ON FLOORS WITH UNDERFLOOR HEATING
- LAYING OF PORCELAIN STONEWARE
- INSTALLATION OF NATURAL OR ARTIFICIAL STONE ON FAÇADES
- LAYING A TILING ON TOP OF AN OLD ONE
- LAYING A CERAMIC FLOOR ON TOP OF AN OLD ONE
Related products
Solution: Laying ceramics on irregularly-shaped substrates
PREPARATION OF THE SUBSTRATE
![](https://molins-dev.mo2o.com/wp-content/uploads/sites/6/pc_block_prop/4722/value/propamsa-0011-dsc4316-ok.jpg)
Check that the substrate is perfectly set, resistant and stable (has completed its maturing period).
![](https://molins-dev.mo2o.com/wp-content/uploads/sites/6/pc_block_prop/4729/value/propamsa-0012-dsc4309-ok.jpg)
Clean the surface of any residues that may hinder the adhesion of the adhesive mortar, such as dust, paint, oil, etc.
Recommended period for the maturation of carriers | ||
Provision | Support | Weather |
Horizontals | Concrete floors Concrete floors | 2-6 months 2-4 months |
Verticals | Concrete walls Block walls Brickwork | 6 months 2-3 months 2 months |
Intermediate layers | Burden sharing Regularisation Levelling | 28 days 28 days 28 days |
APPLICATION
![](https://molins-dev.mo2o.com/wp-content/uploads/sites/6/pc_block_prop/4746/value/propamsa-0010-dsc4346-ok.jpg)
Knead with a slow electric mixer (500 rpm) and spread VAT® FLEX RAPID/ PAM® ECOGEL FLEX / PAM® ECOGELSUPERFLEX on the substrate with a notched trowel, preferably with semi-circular teeth.
![](https://molins-dev.mo2o.com/wp-content/uploads/sites/6/pc_block_prop/4753/value/propamsa-0006-pag-41-2-ok.jpg)
For the application of tiles larger than 900 cm², double bonding must be carried out.
![](https://molins-dev.mo2o.com/wp-content/uploads/sites/6/pc_block_prop/4760/value/propamsa-0007-pag-41--3%28girar-izda%29-ok.jpg)
Apply good pressure on the tile until the grooves of the tile adhesive are flattened.
![](https://molins-dev.mo2o.com/wp-content/uploads/sites/6/pc_block_prop/4789/value/propamsa-0005-pag-41-4-%28girar-izda%29-ok.jpg)
Leave a minimum joint width of 2 mm in interiors and 5 mm in exteriors; grout after 24 hours with the BORADA® range of joint mortars by Molins.
Recommendations
- Do not apply in rainy conditions, or at temperatures < 5ºC or >30ºC.
- On poorly absorbent substrates, open the pore with water and 50% hydrochloric acid (salfuman).
- VAT® FLEX RAPID/PAM® ECOGEL FLEX/ PAM® ECOGEL SUPERFLEXcan be used for external skirting boards on brickwork with a maximum height of no more than 2m.
- Do not apply in thicknesses greater than 15 mm or less than 5 mm.
Would you like to receive more information?
Complete this form and we will get back to you as soon as possible 🙂