Waterproofing system for new swimming pools or superficial rehabilitation of block, mortar or concrete in ceramic finish.

Civil work

Aeronautics Infrastructure Transport

Edification

Commercial Public Residential Sports

Industry

Automotive Chemical industry Food industry Immologistics Retail

SoluciónWaterproofing system for new swimming pools or superficial rehabilitation of block, mortar or concrete in ceramic finish.

Nombre del sistemaPROPAM STOP WATER POOL TILE

Descripción sistema

Waterproofing of swimming pools made of block, mortar or concrete with flexible hydraulic mortar and its auxiliary elements, with ceramic finish and grouting with high performance cementitious joint mortar.

Productos

1. Support

3 . PROPAM® IMPE FLEX

5. PAM ECOGEL FLEX

7. BORADA® CHROMA

2. PROPAM® REPAR TECHNO 20

4. BETOFIBER GLASS

6. Gresite

Memoria descriptiva

Waterproofing of pool shell, mortar or ceramic screed, with PROPAM STOP WATER POOL TILE system, by preparing or regularizing the surface if necessary with PROPAM REPAR TECHNO 20 non-structural repair mortar. Once set, application of hydraulic coating mortar. flexible waterproofing formulated from cement, selected aggregates, and special waterproofing resins, PROPAM IMPE FLEX from PROPAMSA, suitable for pressure and counterpressure up to 10 atm, applied in two coats in a minimum thickness of 2 mm and reinforced with fiberglass mesh BETOFIBER GLASS. Place BETOTAPE SEAL elastic band in case of expansion joints, sharp cracks and vertical and horizontal facing joints. Product that meets the requirements of standard EN 1504_2 and is classified as CM O1 P according to standard EN 14891, as a flexible waterproofing under ceramic. After at least 24 hours, laying of stoneware, ceramic tile in small format with improved cementitious adhesive, zero slip, prolonged open time, deformable, with fibers and free of dust, classified as C2TES1 according to UNE-EN 12004-1, PAM ® ECOGEL FLEX from PROPAMSA. After at least 24 hours, grouting with improved colored cementitious mortar with high performance, reduced water absorption, high resistance to abrasion, water-repellent, with anti-mold effect and without cracks, specially designed for filling joints from 1 to 8 mm in diameter. width between ceramic pieces in any type of flooring, classified as CG2WA according to UNE-EN 13888, BORADA® CHROMA by PROPAMSA.