Projects
Commercial and Exhibition Building – Saltoki Huesca
![](https://molins-dev.mo2o.com/precast-solutions/wp-content/uploads/sites/4/2024/04/precon-edificacion-saltoki-huesca-5.jpg)
Solutions
Warehouse and shop, consisting of a light roof with plan dimensions of 51.50 m x 56.75 m and a 290 m forged at the head of the warehouse. m2. The constructive solution adopted is the modality with porticos at 13.30×14.20 m and 7.50 m façade height.
Facades composed of prefabricated enclosure panels, curved where they meet each other at the corners. On side facades the panel ends in a curve at the top and bottom, forming tangencies with the roof plane. On the rear façade, there is a textured panel.
It is made up of pillars and girders with a double T section in the main roof porch and precast concrete honeycomb plates plus a 5 cm thick compression layer in the slab, made of in situ concrete.
The main roof girders are 80 cm deep and have a purlin between the main roof beams 45 cm edge with half-wood supports. In the slab, the honeycomb plate is 20 cm deep + 5 cm compression layer, the girders are of the inverted T type with a 30 cm drop.
nNotable:
- Panels with curvatures, architectural
![](https://molins-dev.mo2o.com/precast-solutions/wp-content/uploads/sites/4/2024/04/precon-edificacion-saltoki-huesca-5.jpg)
![](https://molins-dev.mo2o.com/precast-solutions/wp-content/uploads/sites/4/2024/04/precon-edificacion-saltoki-huesca-4.jpg)
![](https://molins-dev.mo2o.com/precast-solutions/wp-content/uploads/sites/4/2024/04/precon-edificacion-saltoki-huesca-3.jpg)
![](https://molins-dev.mo2o.com/precast-solutions/wp-content/uploads/sites/4/2024/04/precon-edificacion-saltoki-huesca-2.jpg)
![](https://molins-dev.mo2o.com/precast-solutions/wp-content/uploads/sites/4/2024/04/precon-edificacion-saltoki-huesca-1.jpg)